When your T800 mount stops holding
A dash cam that droops or drops off the windshield is usually telling you the mount or adhesive has reached the end of its life. For the 70mai Dash Cam 4K T800, the fix is straightforward: replace the mount and the adhesive layers together rather than trying to reuse old stickers. The 70mai Mount and Adhesive Stickers for Dash Cam 4K T800 is a full-equipped replacement pack designed to perfectly replace the worn-out accessories of your dash cam.
What the replacement pack includes
- 70mai Mount and Adhesive Stickers for Dash Cam 4K T800: Package includes: Electrostatic stickers x2, Heat-resistant adhesives x2, Mount for Dash Cam 4K T800 x1. You get two full sets of stickers and adhesives, so you can reattach the mount and keep spares for future use.

70mai Mount and Adhesive Stickers for Dash Cam 4K T800
Check your dash cam model before ordering
- Look for the model name on the camera body or box: This pack is listed specifically for the Dash Cam 4K T800. It is not confirmed to fit other 70mai models, so verify your model first.
- Confirm you have the 4K T800: The mount in this pack is for the Dash Cam 4K T800. If your camera is a different model, this pack may not be the right replacement.
How to replace the mount and adhesive on your T800
The supplied information does not include step-by-step installation instructions. The following approach is a general guide for replacing a dash cam mount; always check your camera manual for any model-specific guidance.
- Remove the old mount and clean the glass: Gently detach the old mount from the windshield. Clean the glass area where the new adhesive will go, removing any residue so the new sticker can bond properly.
- Apply the electrostatic sticker first: The pack includes electrostatic stickers. These typically go on the glass before the adhesive to protect the windshield and make future removal easier.
- Attach the heat-resistant adhesive: Place one of the heat-resistant adhesives on the mount or the electrostatic sticker as intended. The pack includes two, so you have a spare.
- Press the mount firmly into place: Hold the mount against the windshield for a short time to ensure good contact. Let it settle before hanging the camera.
- Reattach your Dash Cam 4K T800: Once the mount is secure, slide or clip your T800 back onto it. Check that the camera is stable and aimed correctly.
Why heat-resistant adhesive matters
Windshields get hot in direct sun, and standard adhesives can soften or fail. The heat-resistant adhesives in this pack are designed to cope with higher temperatures, helping your mount stay put. Because the pack includes two adhesives and two electrostatic stickers, you can replace the whole interface between the camera and the glass, not just the mount.
When this replacement pack is the right choice
Choose this pack if you own a 70mai Dash Cam 4K T800 and your current mount is loose, cracked, or no longer sticking reliably. It is also useful if you are moving the camera to a new vehicle and want fresh adhesives. If your dash cam is a different model, this pack is not confirmed to fit, so look for a model-specific replacement instead.
Product details at a glance
- 70mai Mount and Adhesive Stickers for Dash Cam 4K T800: Full-equipped replacement pack for Dash Cam 4K T800, perfectly replaces the worn-out accessories of your dash cam. This is a complete replacement kit, so you do not need to source separate stickers or adhesives.


