Back to Blog
Buying Guides 2026-11-17 70mai Official Store | Innovative Dash Cams and Accessories ... 0 views

70mai RC12 Rear Camera: Which Dash Cams Does It Fit?

70mai RC12 Rear Camera: Which Dash Cams Does It Fit?

Check whether the 70mai RC12 rear camera fits your A510, A810, A500S, A400, A200 or S500, and understand the two-channel limit before you buy.

The RC12 fits six specific 70mai dash cams

The 70mai Rear Camera RC12 is listed as compatible with the 70mai Dash Cam A510, A810, A500S, A400, A200, and S500. If your dash cam is not on that list, the RC12 is not confirmed to work with it. This is a buying guide for owners of those six models who want to add a rear or interior view.

The RC12 records at 1920 x 1080 resolution with an F2.0 aperture and a 130° viewing angle. It supports HDR rear recording or interior recording. Those specs give you a clear picture of what to expect, but the first decision is simply whether your dash cam is on the compatibility list.

RC12 compatibility at a glance

The two-channel rule: rear or interior, not both

70mai dash cams support only two channels. That means if you connect the RC12 as a rear camera, you cannot also connect an interior camera at the same time, and vice versa. The RC12 itself can be used for either rear or interior recording, but your dash cam will only accept one additional camera.

Before you buy, decide which view matters more for your driving. A rear view helps with what happens behind you; an interior view helps with what happens inside the cabin. You cannot have both with the RC12 on these dash cams.

What the 5.5-meter cable means for your car

The RC12 comes with a 5.5-meter cable. That length is intended to reach from the rear of the vehicle to the dash cam mounted at the front. For many cars, this is enough, but larger vehicles or complex routing paths may need more length. The listing does not provide a maximum vehicle size or a recommended routing path, so measure your planned route before installing.

If you plan to use the RC12 as an interior camera, the cable may be longer than needed, which can leave excess to manage. The minimalistic design is meant to make self-installation easier, but you should still plan how to secure any slack.

How to confirm your dash cam model

The model name is usually printed on the dash cam body or shown in the camera's menu. Check that it matches one of the six listed models exactly. If your dash cam is a different 70mai model, the RC12 is not confirmed to be compatible. Do not assume that because a dash cam has a rear camera port, the RC12 will work.

If you are unsure, consult your dash cam's manual or the product page for your specific model. The RC12 listing is the authoritative source for compatibility.

RC12 recording and design facts

When the RC12 is the right add-on

If you own one of the six compatible dash cams and want a single additional camera for rear or interior coverage, the RC12 is a straightforward choice. It provides 1080p resolution, a 130° view, and HDR support. The 5.5-meter cable is designed for self-installation in many vehicles.

If you need both rear and interior views, the RC12 cannot provide both simultaneously on these dash cams. In that case, you would need a different solution, such as a dash cam with more channels or a separate camera system. The RC12 is best for drivers who have a clear priority for one extra view.

Related Articles

Customer Service
Home
Products
Cart
Profile