Why Switch to a Fuse Box Connection?
If you want to move your 70mai battery pack from the cigarette lighter socket to a permanent fuse box connection, you will need the specific charging cable and fuse holder designed for this purpose. This guide explains what the kit does and how to approach the installation.
What the Kit Includes
- 70mai Fuse Box Charging Cable and Fuse Holder: The 70mai Fuse Box Charging Cable and Fuse Holder is designed for switching from the cigarette lighter to a fuse box solution for your battery pack. This is the only cable set that supports a hardwired fuse box connection for 70mai battery packs. Using it ensures proper fit and power delivery.

70mai Fuse Box Charging Cable and Fuse Holder
Installation Steps
The following steps outline the general process. Always consult your vehicle owner's manual and local regulations before working with vehicle electrical systems.
- 1. Prepare the vehicle: Disconnect the vehicle battery negative terminal to prevent shorts. Locate a suitable fuse box slot near where you plan to mount the battery pack.
- 2. Connect the fuse holder: Insert the supplied fuse into the fuse holder. Choose a fuse rating that matches your battery pack's power requirements (refer to your battery pack manual).
- 3. Route the charging cable: Run the cable from the fuse box location to the battery pack position. Avoid sharp edges, moving parts, and hot surfaces. Secure the cable with zip ties or adhesive clips.
- 4. Connect to the fuse box: Attach the fuse holder to the chosen slot in the fuse box. Ensure a snug fit and that the fuse is seated correctly.
- 5. Connect to the battery pack: Plug the charging cable into the designated input port on your 70mai battery pack. Confirm the connector type matches.
- 6. Test the connection: Reconnect the vehicle battery. Start the engine and verify that the battery pack begins charging. Check that no warning lights appear on the dash cam or battery pack.
Important Notes
This installation is intended for users comfortable with basic vehicle electrical work. If you are unsure about any step, consult a professional installer. The cable and fuse holder are specifically for switching from a cigarette lighter connection; they are not a universal hardwire kit for all dash cams.


